Categories+
Search Details
To search for a product enter search words below. The results will be displayed with links to the specified product. Note that price based searches operate on retail prices and may not match the price you pay.
Page: << < 1 2 3 4 5 ... > >>
41.M8 x 21mm OD Washer, 0.94mm thick, in zinc plated steel. General application.(Flat Washers)£9.99
42.Moulding clip washer used with BSF044-1. Riley RME.(Moulding Clips - Miscellaneous)£9.99
43.No.10 x 1/2" ZPY Hex self-tapping screw with a washer. General application.(Hex Self-tapping Screws)£9.99
44.No.12 x 1/2" ZPY Hex self-tapping screw with a washer. General application.(Hex Self-tapping Screws)£9.99
45.No.14 x 1/2" ZPY Hex self-tapping screw with a washer. General application.(Hex Self-tapping Screws)£9.99
46.Plastic washer in white used with quick release fasteners 74150-NAT / 83270 above. Mini and general application.(Quarter Turn Studs and Sockets)£9.99
47.Plastic washer used with quick release fasteners 74150 / 74151 / 76040 / 83270 above. Mini and general application.(Quarter Turn Studs and Sockets)£9.99
48.Rubber Washer 20mm diameter, hole 6.5mm, thickness 3.0mm. General application.(Flat Washers)£9.99
49.Self-threading washer nut 1/8" diameter pin. General application.(Badge/Push-on Fixes)£9.99
50.Two pronged Lift the Dot Stud and Washer. General application.('Lift the Dot' Fasteners)£9.99
51.White nylon washer 12.7x 1.6mm with 6.4mm hole size. General application.(Flat Washers)£9.99
52.Fibre Washer 15/32" ID x 3/4" OD x 1/16" thickness. General application.(Fibre/Leather Washers)£8.99
53.Fibre Washer 29/64" ID x 11/16" OD x 1/16" thickness. General application.(Fibre/Leather Washers)£8.99
54.Fibre Washer 3/8" ID x 7/8" OD x 1/16" thickness. General application.(Fibre/Leather Washers)£8.99
55.Fibre Washer 7/16" ID x 11/16" OD x 1/16" thickness. General application.(Fibre/Leather Washers)£8.99
56.Fibre Washer 11/32" ID x 9/16" OD x 1/16" thickness. General application.(Fibre/Leather Washers)£7.99
57.Fibre Washer 37/64" ID x 7/8" OD x 1/16" thickness. General application.(Fibre/Leather Washers)£7.99
58.Fibre Washer 1" ID x 1.1/2" OD x 1/16" thickness. General application.(Fibre/Leather Washers)£7.49
59.Fibre Washer 1.13/32" ID x 1.11/16" OD x 1/16" thickness. Triumph and general application.(Fibre/Leather Washers)£7.49
60.Fibre Washer 1/2" ID x 11/16" OD x 1/16" thickness. General application.(Fibre/Leather Washers)£7.49
.
Home
How To Shop On-line
Download Catalogues
Part Number Cross Reference Sheets
Metric Conversion Table
Door trim pad clip for .110" board and snap fit in 1/4" panel hole, for extend panel application. Jaguar, Lotus and general application.
£9.99
Round 'Tuckers' moulding clip for 11.7mm moulding gap and 3.2mm panel hole. Ford Zodiac MK3, Triumph Stag, Austin 1100/1300, Cambridge and general application
Jaguar MK1 Cant Rail Clip.
Round 'Tuckers' moulding clip for 7.9mm moulding gap and 3.2mm panel hole. Austin Mini Cooper 'S', Riley Elf, Wolseley Hornet, Hillman Super Minx.
Door trim pad clip for .100" board and snap fit in 9/32" panel hole. General application.
Door trim pad clip for .100" board and snap fit in 1/4" panel hole. Triumph Herald, Spitfire, TR6, GT6, Jaguar, Minor 1000 and general application.
D' type edge clip for 1.2 - 3.4mm material thicknesses. All BL Austin/Morris, Triumph, Rover , Saab and general application.
Snapsac' sealing sleeve, for 8.5mm panel hole, depth 16.0mm. General application.
Moulding 'T' bolt. Ford Escort MK11 and general application.
Moulding clip for 20.7mm moulding gap and a 5mm panel hole. Sunbeam Imp, Avenger sill.
Mini Estate rear compartment edge trim clip, for use with part no. 14480.
S' type edge clip for 2.4mm and 5.5mm material thicknesses. Depth 17mm and Width 12.7mm. Not barbed. Triumph Stag,TR4-6 seat back.
Headrest Bezel and Washer finished in Nickel Plate. (4 pairs in pack). Jaguar,Triumph, MGB, Mini, Rover and general application.
Nylon snap-in nut for 17/64" (6.8mm) square hole and use with No.10 self tapping screw. Ford Capri MK2/3 Front No. Plate mounting and general application.
Brake Hardware- Brake hose 'U' Clamp. Ford Cortina, Escort, Sierra and general application.
Moulding Clip. Jensen Interceptor, Volvo 1800 (Jensen)
Brake Hardware- Twin Way Metal Brake Pipe clip. 3x 3/16" and 1/4". Triumph and general application.
Backing plate for interior trim used with BSF316. Rover, Rolls Royce/ Bentley and general application.
Moulding Clip - Backing plate and spring clip. Jowett Javelin.
